Cementitious Mortars | BULL-BOND®

December 28, 2021 By victor ayala Cementitious Mortars • SELF-LEVELING 0 Comments

Self-Leveling Mortar

LATEX-MODIFIED SELF-LEVELING CEMENTITOUS MORTAR

PRODUCT DESCRIPTION

BULL-BOND® SELF-LEVELING MORTAR is a blend of cement, fine graded sand and special additives designed to be mixed with BULL-BOND® latex admixture CONCRYL™. The polymer-modified SELF-LEVELING MORTAR mix is ideal for leveling concrete roofs and floors. BULL-BOND® SELF-LEVELING MORTAR seeks its own level and produces a smooth, flat, hard surface; dries and hardens quickly without shrinking, cracking or spalling. When installed properly the PRO LEVEL™ system will have a strong and durable adhesion over the existing substrate.

February 6, 2017 By victor ayala Cementitious Mortars 0 Comments

GENERAL REPAIR

MULTI-USE PLASTER AND REPAIR MORTAR

PRODUCT DESCRIPTION

SBK GENERAL REPAIR 2500 is a blend of cement, specially graded masonry sand and admixtures that are combined in a carefully controlled proportion to enhance their characteristics. The polymer-modified SBK GENERAL REPAIR 2500 mix is designed for applications of 1/8” – 1“ ideal for patching and leveling cement based surfaces. This component is part of the BULL-BOND® Professional™ line of ready-mixed mortars compatible with SBK LATEX ADMIX™ and other BULL-BOND® Professional™ admixtures. This product has an excellent consistency, quality with good mixing, placing and finishing properties. It is a general purpose mortar that combines ease of mixing with excellent performance. The product is environmentally friendly with the use of local materials and enhanced with reinforced fiber.

February 6, 2017 By victor ayala ADHESIVE • Cementitious Mortars 0 Comments

MICRO-TOPPING

FINE RESURFACING CEMENTITIOUS COATING

PRODUCT DESCRIPTION

BULL-BOND® MICRO-TOPPING™ is a blend of cement and fine graded sand. This product is designed to be a polymer modified cementitious coating that works mainly as a concrete surface renewal. Once mixed
properly it has excellent consistency, with good mixing, placing and finishing properties. MICRO-TOPPING™ is designed to be mixed with one of the BULL-BOND® latex admixtures like SABAKRETE™ or CONCRYL™. The polymer-modified MICRO-TOPPING™ mix is ideal for roof resurfacing that ensures proper surface preparation prior to coating application, to repair irregular, deteriorated and delaminated concrete surfaces and
for water-tight plastering of submerged concrete surfaces. The product is environmentally friendly with the use of local materials.

September 28, 2015 By victor ayala ADHESIVE • Cementitious Mortars 0 Comments

Thermo-Bond™

ADHESIVE MORTAR FOR EPS/XPS

PRODUCT DESCRIPTION

BULL-BOND® THERMO-BOND™ Adhesive Mortar for EPS/XPS (with fibers) is a high quality construction adhesive for bonding expanded polystyrene (EPS) and extruded polystyrene (XPS) boards (skinless) to mineral substrates. This adhesive is cement-based and possesses high adhesion power to all types of mineral bases, so as to polystyrene and ensures strong bonding of the thermal-insulation boards to very strong bases. The armoring fibers within the adhesive’s content increase its strength and mechanic stability. THERMO-BOND™ is a key component of the BULL-BOND® STUCCO-PRO™ EIFS. The air-entraining additives within the mortar increase its thermo-insulation properties with more than 10%.

April 8, 2014 By bullbond_admi Cementitious Mortars • SELF-LEVELING 0 Comments

PRO LEVEL™

Latex Modified Roof Leveling System

PRODUCT DESCRIPTION

BULL-BOND® PRO LEVEL™ is a latex modified, self-leveling, high resistance roof overlay system designed to level water ponding problems on concrete roofs and correct irregular substrates prior to the installation of waterproofing systems. PRO LEVEL™ seeks its own level and produces a smooth, flat, hard surface; dries and hardens quickly without shrinking, cracking or spalling. When installed properly the PRO LEVEL™ system will have a strong and durable adhesion over the existing substrate.